background image

FittinQ B.V.

Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl

Please study the instruction manual and below information carefully before installing or using this product. 
Please keep this user manual for further reference
 

1.   The luminaires may only be installed by authorized and qualified technicians according the valid 
      regulations for electrical installation. 
2

.

  Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come 

      into contact with any areas of the terminal connections or voltage control par ts.

3

.

  The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution

      box, before any installation, maintenance or repair work is undertaken.
4.   Exterior lighting must not be installed during rain.
5.   Take account of the minimal separation distance from other objects and the room required around the fitting.
6.   If in any doubt, consult a professional, taking local installation requirements into account. Some countries
      stipulate that lighting may be installed only by registered installers.
7.   Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V
      low voltage conductors.
8.   Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical 
      components
9.  Take account of all available technical information.
10.Meaning of symbols:

SAFETY INSTRUCTION

III

220-240V~

50Hz 

Max.

ø

50mm 

GU10 

2Max.50W 

IPXX

Light Angle 

35cm² 

55

º

 

0.5m 

 For indoor use only, where direct contact with water is impossible

 Protection Class I: the fitting must be earthed

 Protection Class II: the fitting is doubled insulated and does not require earthing

 Protection Class III: the fitting is low voltage

 Minimum distance from lighted objects (meters) 

The type of lamp and maximum size and wattage indicated in each lighting unit must not 
be exceed; different items require different kind of light sources with different bulb icons   

The armature is designed to work only with the indicated voltage. Different items require
different working voltage.

The luminaire can be used in combination with a dimmer

The reference light angle and light space of the luminaire

This luminaire cannot be disposed together with normal domestic waste in standard rubbish 
can, but you have to bring it to a staging area for electrical waste  

 This icon indicates the level of water-proof and dust-proof

11.Take note of the symbols when connecting wires: 

Отзывы: