5. Make sure the fan is disconnected from
the electrical supply and carefully insert
the fan into the Mounting bracket. Rotate
the fan until the notch of the hanger ball
engages the pin of the mounting bracket.
Then, firmly fix the screws.(Fig5)
6. Assembly the LED light plate to the light
kit fixing bracket by the screws and
connect the LED light kit by male &
female plug. Insert the remote control
receiver on the mounting bracket.
Connect the motor wires, LED light
wires and receiver’s power wires to the
receiver by male & female plug.Also,
connect the ground wire by male &
female plug.Then connect the power
supply with the fan.(Fig6)
7. Assembly the shade to the light plate and
assembly the upper canopy to the
mounting bracket. Both rotate clockwise
when assembling.(Fig 7)
8. Now, the fan is completed.(Fig 8)
7. Installation of the ceiling fan
1. Insert down rod over upper
canopy, then insert the cross
pin over yoke & Cotter pin and fasten the
2 screws which fix the down rod(Fig 1)
2. Install the mounting plate by screws
(Fig.2)
3. Loose the screw from motor.(Fig 3)
4. Install the blade on the motor by
Screws.(Fig.4)
If the fan or light kit is PARTIALLY pre-assembled, you can skip the assembly procedures to next step
P.4
