29
RF STATEMENT
Medical Electrical Equipment needs special precautions regarding
EMC and needs to be installed and put into service according to the
EMC information provided in the following section.
Interference may occur in the vicinity of equipment marked with the
following symbol
.
Portable and mobile RF communication equipment (e.g. cell phones)
can affect Medical Electrical Equipment. The use of accessories and
cables other than those specified may result in increased emissions or
decreased immunity.
The device uses RF energy only for its internal function. Therefore, its
RF emissions are very low and are not likely to cause any interference in
nearby electronic equipment.
The device is suitable for use in all establishments, including domestic
establishments and those directly connected to the public low voltage
power supply network that supplies buildings used for domestic
purposes.
Portable and mobile RF communications equipment should be
used no closer to any part of the device, including cables, than the
recommended separation distance calculated from the equation
applicable to the frequency of the transmitter.
The device is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. Any other accessories,
transducers and cables may result in increased emissions or decreased
immunity and EMC performance.
The device should not be used adjacent to or stacked with other
equipment and if adjacent or stacked use is necessary, it should be
observed in order to verify normal operation in the configuration in
which it will be used.
Medical Electrical Equipment needs special precautions regarding
EMC and needs to be installed and put into service according to
the EMC information provided in the following. Portable and mobile
RF communication equipment (e.g. cell phones) can affect Medical
Electrical Equipment. The use of accessories and cables other than
those specified may result in increased emissions or decreased
immunity of the unit.
