QALCOMET HEAT 1, Руководство пользователя

Страница: 26 / 52

Heat meter calculator QALCOMET HEAT 1 PEQMH1V01
26
8. OPERATION
8.1. Display description
INT PAR LOG PRN INF
Key to symbols Description
1. Groups of parameters (display levels)
▼
INT
Integral parameters
▼
PAR
Informative parameters
▼
LOG
Archive data and set day values
▼
PRN
Printing the reports
▼
INF
Information on heat meter configuration and regulator control parameters
Additional information
R
Relay output is activated, normal operation
R<
Parameter value is below minimum permissible value (for relay outputs)
<R Parameter value exceeds maximum permissible value (for relay outputs)
^ ; v Regulator status: ^ - opening the valve, v - closing the valve
2. Number and group of indicated parameters
Σ
Cumulated parameter value (for example, total heating energy consumed
by the 1-st and 2-nd system (E1+E2))
1…5
Number of measurement system (for example, power or energy
consumed by 1-st or 2-nd system) or number of measurement channel
(volume, flow, temperature, pressure measurement etc.)
1-2 (3-4) Differences (for example, difference in amount of heating media (M1-
M2), (M3-M4) or temperature difference (

1-

2,

3-

4))
3. Operation mode
H
Hourly archive data is being printed (displayed)
D
Daily archive data is being printed (displayed)
M
Monthly archive data is being printed (displayed)
TEST Test mode
SET Parameterization mode
4. Measurement units
m
3 (
t)
Volume (mass)
m
3
/h (t/h)
Flow rate
kPa Pressure
o
C Temperature, temperature difference
GJ, Gcal, MWh, kWh Energy
kW Power
h
Hours
1. Groups of
parameters and
additional information
3. Operation mode
4. Measurenent units
2. Parameter numbers and
group numbers