INSTALLATION
INSTRUCTIONS
QA1
Pro Coil Coil-Over Sy
stems
P/N GS401,
GR401, GD401, GS501, GR501, GD501
MS303, MS302, MS301, MR303, MR302, MR301, MD303, MD302, MD301
READ ALL INSTRUCTIONS CAREFULLY AND THOROUGHLY PRIOR TO STARTING INSTALLATION. PRODUCTS THAT HAVE BEEN INSTALLED ARE NOT ELIGIBLE FOR
RETURN. USE THE PROPER JACKING LOCATIONS. DEATH OR SERIOUS INJURY CAN RESULT IF INSTRUCTIONS ARE NOT CORRECTLY FOLLOWED. A GOOD CHASSIS
MANUAL, AVAILABLE AT YOUR LOCAL PARTS STORE, MAY ALSO AID IN YOUR INSTALLATION.
TOOLS AND SUPPLIES REQUIRED
• Floor Jack
• Jack Stands
• Ball Joint Separator
• Spanner Wrench (QA1 P/N T114W or T115W)
•
SAE Wrench Set •
SAE Socket Set • Coil Spring Compressor •
Permatex® Anti-Seize Lubricant
DO NOT VOID YOUR WARRANTY!
Permatex® Anti-Seize Lubricant should be used on coil-over threads to prevent galling. Failure to lubricate
the coil-over threads with Anti-Seize prior to making ride height adjustments will cause damage to your
shock absorber and will void any warranty. All ride height adjustments must be made with the vehicle
weight completely unloaded from the suspension. Please call QA1 Technical Support with any questions.
DISASSEMBLY INSTRUCTIONS
1. Measure the vehicle ride height from the ground to the center of the wheel wells and record these measurements.
2. Unbolt front upper shock mounts from inside the engine bay.
3. Raise and support the vehicle by the frame with jack stands on a stable surface and remove front wheels.
4. Remove the sway bar end links.
5. Unbolt lower shock mounting bolts and remove the shocks from the car.
