WIRE LENGTH TABLE
17
25
40
80
100
VOLTAGE DROP CHART
(W)
VDC
897’
564’
355’
223’
140’
88’
55’
35’
22’
567’
356’
224’
141’
88’
56’
35’
22’
14’
309’
194’
122’
77’
48’
30’
19’
12’
7’
130’
82’
51’
32’
20’
13’
8’
5’
3’
84’
53’
33’
21’
13’
8’
5’
3’
24
10
AWG
(5.6mm
2
)
12
AWG
(3.3mm
2
)
14
AWG
(2.0mm
2
)
16
AWG
(1.3mm
2
)
18
AWG
(0.78mm
2
)
20
AWG
(0.50mm
2
)
22
AWG
(0.33mm
2
)
24
AWG
(0.20mm
2
)
26
AWG
(0.13mm
2
)
Wa�s
*
Distances are based on a 5% Voltage drop max.
● This product must be installed in accordance with the
applicable installation code by a person familiar with
the construction and operation of the product and the
hazards involved.
WIRING DIAGRAM
QTM-eLED+DMX
SPECIFICATIONS
12V - 28V DC IN
To connect the driver to a DC power supply unit (PSU), connect the PSU’s positive voltage supply wire to the VDC+ connector and the PSU’s negative
voltage supply wire to the VDC- connector.
EXT in
You have the possibility to connect an external control device (0-10V control device, 10kΩ potentiometer or show selection switch) to the driver’s Ext in+
and Ext in - connector. Configure the driver for use with an external control device over the 3 - button user interface.
DMX in/LedSync out
Use these connectors when the driver is used in a DMX network. For DMX in, connect the network cable’s DMX+, DMX- and DMX shielding wire (the
orange/white, orange and brown wire in a CAT5 cable) to the DMX in+, DMX in- and DMX in shield connector respectively. For LedSync out, connect the
network cable’s DMX+, DMX- and DMX shielding wire to the LedSync out+, LedSync out- and LedSync shield connector respectively. DMX Shield must be
grounded to Earth Ground at a single point external to power supply
LED groups
Indicates the location of the connectors for your LED groups. R(ed) represents channel 1
, G(reen) represents channel 2, B(lue) represents channel 3 and
W(hite) represents channel 4. The default group color allocation can be changed over the 3-button user interface.
M
Max | Vdc+
32V | Vdc-
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync thru +
LedSync thru -
LedSync shield
TC
1
2
3
Group
Group
Group
Group
LED
-
4
LINEARdrive 180D
12-28V / 6A Direct voltage controlled LED driver
LED groups
R
R
W
R
B
G
R
R
DMX in shield
DMX in +
DMX in -
Ext in +
Ext in -
{
12 -28VDC IN
-
+
LedSync shield
LedSync thru +
LedSync thru -
2
1
0.2-1.5 mm
2
0.35 inch
0.5-1.5 mm
2
AWG 20-16
0.35 inch
AWG 24-16
VDC and LED connectors:
Other connectors:
2
© 2020, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
