INSTALLATION
LED POWER SUPPLY - QTM-DRIVE
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change. Rev-09-29-20
CSA Requirements
•
Suitable for indoor use
•
This power supply must be installed according to the National Electric Code and local codes and ordinances and in
accordance with applicable installation code by a person familiar with the construction and operation of the product and
the hazards involved.
•
Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
•
This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
•
To avoid a hazard to children, account for all parts and destroy all packaging materials.
•
DMX shield wire must be grounded to earth ground at a single point external to power supply.
Model
Input Voltage
(V)
Frequency
Nominal Output
Voltage (VDC)
Nominal Output
Wattage (W)
Input Current
(A)
QTM-DRIVE-100
QTM-DRIVE-200
QTM-DRIVE
120/277
120/277
1.05
2.10
50/60
50/60
100
200
QTM-DRIVE-60
QTM-DRIVE-120
120/277
120/277
0.67
1.30
50/60
50/60
60
120
24
24
12
12
Q-Tran, Inc.
Q-TRAN, INC.
MILFORD, CT U.S.A.
(203) 367-8777
WWW.Q-TRAN.COM
CLASS:
3425 - 15
3425 - 95
120V-277V
INPUT VOLTAGE
OUTPUT VOLTAGE
DMX
24V
12V
DALI
LOW VOLTAGE
LIGHTING SYSTEM
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
CONTROL TYPE
●
Type IC recessed, inherently protected
Type IC ENCASTRE, PROTECTION INHÉRENTE
●
Wall mount only
INSTALLATION MURALE SEULEMENT
●
Suitable for damp locations
CONVIENT AUX EMPLACEMENTS HUMIDES
●
Not for use with dimmers
NE CONVIENT PAS À DES GRADATEURS
● For supply connections use
wire rated
for at least 60ºC.
●
Class 2
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET
SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
