Q6S
AC POWER SUPPLY 50W–300W
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change. Rev-12-23-20
COMPLIANT
•
For indoor use only
•
Suitable for damp locations
•
Surface mount any position
•
Dimmer, if used, must be magnetic low voltage dimmer
•
For supply connections use wires rated for at least
90°C
•
Certified to UL 2108
•
Made in the U.S.A.
Housing
•
18 gauge welded steel enclosure: 8.63"L x 5.75"W x 3.10"D
•
Knockouts: 5
•
Color: white powder coating (standard)
•
(2)1/4" threaded rods (rods not included)
Toroidal Transformer - Dual Tap (DT)
•
(2) Primary taps: 12VAC, 13VAC or 24VAC, 26VAC
•
Loads may be connected to one (1) of the primary taps up to the full watt rating of the PSC
•
20% derating required
•
The advantage is that the PSC can be tapped to recover voltage drop and produce between 85%-100% light output
NOTE: See Voltage Drop Calculator at www.q-tran.com
Secondary Circuit
•
Up to three (3) magnetic circuit breaker
•
Amps: 5A, 10A, 12.5A, 15A, 20A, 25A
NOTE: Breakers are sized to the feed load per N.E.C. Article 411 (not to exceed 25 amps per load). All wiring by the electrical contractor must be Class 1 compliant to N.E.C.
Toroidal Choke
•
Q-Tran’s standard choke, or “debuzzing coil” reduces noise when dimming and helps negate in-rush current that is
prevalent with LED loads. It allows for quiet operation and eliminates nuisance tripping. Choke is standard.
NOTE: Suspension rods are purchased separately and not from Q-Tran, Inc.
5.75"
8.63
"
3.10
"
5.75"
Bottom View
BOTTOM
