manualshive.com logo in svg

Q-tran FLEX-MINI, Руководство пользователя

Поделиться
Скачать
Q-tran FLEX-MINI Скачать руководство пользователя страница 22

© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com 

Specification subject to change. 

Rev-03-08-21

INSTALLATION

 

   FLEX Light - FLEX Mini

NOTES:

 

• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void

Light Wiring - Static White, Static Color

NOTE:
1. This fixture must be used in conjunction with DC24V power supply.
2. Always observe proper polarity.
3. Ensure to add 20% buffer when sizing power supply.
4. Ensure that the power cable carried current is no greater than 80% of its capacity.
5. To minimize the voltage drop and keep light consistency, position power supply nearest to the power feed end of the fixture and keep the power line as short as possible.

Instructions of  Wiring:
Red Wire Connects to Anode(+)
Black Wire Connects to Cathode(-)

Driver

INPUT:AC100~240VAC,50-60Hz
OUTPUT:DC24V

GND

Dimmer(Optional)

A1

①

Driver

INPUT:AC100~240VAC,50-60Hz
OUTPUT:DC24V

GND

Dimmer(Optional)

A2

②

The power supply can drive one length or
different lengths within allowed maximum 
length by feeding light one end. 

(Compatible with most 0~10V
 dimming controllers.)

(Compatible with most 0~10V
dimming controllers.)

The power supply can drive one length or different
 lengths within allowed maximum length by feeding
 light both ends. 

Single End Feed 
Red/Amber

Single End Feed
Green/Blue/White

Double Ends Feed 
Red/Amber

Double Ends Feed
Green/Blue/White

Max.Continuous Length

49.21’

32.81’

98.43’

65.62’

Содержание FLEX-MINI






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды