q-Tech QSW-9010, Руководство по настройке CLI

Страница: 95 / 101

User Manual
12. Port statistics and PM statistics 95
www.qtech.ru
12. PORT STATISTICS AND PM STATISTICS
OLT currently supports port statistics for uplink ports and PON ports; Performance statistics for PON
ports, ONU, and gem. The port statistics (See port statistics and PON port statistics) does not need
to be enabled, and can be cleared by clear co corresponding ports.
Performance statistics does not support manual remove currently. It will automatically report to the
network management every 15 minutes when connected to NMS.
For each port statistics and PM management is as follows:
Figure 12-1 PM on statistics and management chart for each port
12.1. Port Message Statistics
This command is used to query the statistics of Ethernet ports. Use this command when you need to
judge whether the device is running normally according to the statistics of the Ethernet port.
12.1.1. Message statistics of uplink-port
View port statistics:
QSW-9010 (config) # show interface xe9 / 4