q-Tech QSW-9010, Руководство по настройке CLI

Страница: 25 / 101

User Manual
3. Remote ONU function configuration 25
www.qtech.ru
3. REMOTE ONU FUNCTION CONFIGURATION
3.1. ONU automatic discovery
In the corresponding PON port, open ONU automatic discovery function, and ONU can be in
operational state automatically if the optical power is normal, unnecessary to be manually added.
Enable:
OLT (config) interface gpon-olt1 / 1
OLT (config-gpon-olt1 / 1) # onu auto-learn enable
Disable:
OLT (config-gpon-olt1 / 1) # onu auto-learn enable
View:
GPON (config) # show running-config interface gpon-olt1 / 1
Description:
Automatic discovery onutype will use the default profile STG-402, and get online with sn authentication
method.
Using automatic discovery of on-line ONU, it will not be offline when the auto-discovery function is
canceled.
The default state of auto discovery function is disable.
3.2. ONU Activation and deactivation
The command is used to activate ONU in a deactivated state. Use Deactivate command to deactivate
the ONU, then the ONU will not be able to work properly, use this command to activate the ONU,
and restore its normal state.
Activate:
OLT (config) interface gpon-onu1 / 1: 1 OLT (config-gpon-onu1 / 1:
1) # active
Deactivate:
OLT (config-gpon-onu1 / 1: 1) # deactive