2
EXPLANATION OF TERMS AND SYMBOLS
The term “
WARNING
” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.
The term “
CAUTION
” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in
equipment damage to equipment that may not be covered under the warranty.
The term “
IMPORTANT
” indicates instructions or information that are vital to the successful completion of the procedure.
The term “
NOTE
” indicates additional useful information.
The lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this
manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
•
Elevated Operating Ambient
– If installed in a closed or multi-unit rack assembly, the ambient operating temperature
of the rack environment may be greater than room ambient. Ensure that the maximum allowed operating temperature is
not exceeded – see the "Environmental" on page 3.
•
Reduced Air Flow
– Installation of the equipment in a rack should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Clean only with a dry cloth.
4. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
5. Only use attachments/accessories specified by the manufacturer.
6. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
7. Do not submerge or use this apparatus in or near water or liquids.
8. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
9. Adhere to all applicable, local codes.
10. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
11. To reduce the risk of electric shock, power cord shall be connected to a mains socket with a protective earthing connection.
12. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where the
power cord exits from the apparatus.
13. The appliance coupler, or the AC mains plug, is the AC mains disconnect device and shall remain readily accessible after
installation.
14. Keep the ventilation opening free of dust or other matter.
15. Do not block any ventilation opening.
16. Install in accordance with the manufacturer’s instructions.
