Q-SYS PL-LA Series, Руководство пользователя, Страница: 20 / 37

20
Flown Deployment
CAUTION!:
When transporting the loudspeakers, return the Angle Bar to the retracted position (P setting).
NOTE:
Different kinds of PL-LA loudspeakers cannot be mixed together!
The PL-LA rigging system uses self-clinching captive locknuts that prevent loosening without having to use Loctite or other single-use
nylon nuts. Locknuts are free running until clamp load is induced. A modified angle on the loaded flank provides the vibration-resistant
locking feature. Locking feature reusability is not affected by the number of uses.
WARNING!:
Always use the Q-SYS SC-000777-01 M6 shoulder screws provided with the rigging system.
Attaching PL-LA to the Array Frame PL-AF Down Tilt
1. Attach two Rear Links to the Array Frame.
NOTE:
The side of the Rear Link with the nut will always be placed to the inside of the array.
2. Remove the side panels from each side of the loudspeaker and put the angle slider in position FLY.
3. Attach the front of the loudspeaker to the Array Frame.
4. Attach the angle slider to Rear Link.
5. Torque everything to 11.3 N∙m (100 lbf∙in).
1
2
3 4
1
2
3
4
Figure 16