Section 2. Safety Information
2. Safety Information (Feb 2022)
Overview
Q-Lab accepts no responsibility for the consequences if the user fails to comply with the instructions in this Technical
Manual. Q-Lab will accept responsibility for defective parts or components only if the machinery was defective at the
time that the tester was shipped.
●
Warning:
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
●
This manual does not claim to address potential safety issues, if any, associated with the use of this product.
●
It is the responsibility of the user of this manual to establish appropriate safety and health practices and to determine
the applicability of regulatory limitations prior to use.
●
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
safety devices may be impaired.
●
The Q-SUN meets the European Low Voltage Directive 2014/35/EU and complies with the requirements of
EN 61010-1: 2010 (Third Edition), “Safety of Electrical Equipment for Measurement, Control and Laboratory Use”.
●
The Q-SUN meets the European Electromagnetic Directive 2014/30/EC and complies with the requirements of
EN 55011:2007 Radiated and Conducted Emissions – class A.
●
Use only parts that have been supplied or recommended by Q-Lab.
5
