User’s manual of remote client software
Display LOGO: control whether to display LOGO.
Display OSD: control whether to display OSD.
After the setup is finished, click “confirm”. If need reboot, just click “Reboot” button.
(Notice: the information and channel name in motion detection record can’t be copied to
other channels)
2.5.3.1.3 COM configuration
Select “COM configuration” in the remote setup interface, show as Fig 2.5.36.
In this interface, you can setup the parameters of 232 and 485.
After the configuration, click “confirm”. If need to reboot the server, just click “reboot” button.
Fig 2.5.36
2.5.3.2.4 Alarm configuration
Select “Alarm configuration” in the remote setup interface, show as Fig 2.5.37.
In this interface, you can setup the parameters alarm parameters.
Alarm type: “normal close” and “normal open” can be selected.
Schedule: in the “schedule” option, setup the schedule of alarm input.
Trigger alarm output: select the trigger channel when the alarm happened.
Trigger channel: select the record channel when the alarm happened.
- 49 -
