Q-See QSNDVR16M, Руководство пользователя, Страница: 33 / 86

USER PASSWORD : Common user password is “0000” by default as well. However, only the
administrator is authorized to change it which is comprised of four numbers between 0 and 9.
PASSWORD CHECK : If you choose “ON”, users have to input the password before entering menus.
You can setup the DVR’s configuration if you enter the administrator password. And the common user
password just allows you to the check the live image or saved record; if you choose “OFF”, there is no
limitation on configuration. Anyone can enter the system directly without password. (Fig 3.2.4 Password
check)
TIME SETUP : Use the “Up” “Down” or Left” and “Right” buttons to move the cursor and use the number key
on panel or remote control to modify the value. If the DVR is recording or playing back you can not access this
menu until the recording or playing back is stopped. (Fig 3.2.5 Time setup)
TIME FORMAT : YY/MM/DD: Asian format, Year/Month/Day; DD/MM/YY: European format,
Day/Month/Year; MM/DD/YY: American format, Month/Day/Year. (Fig 3.2.6 Time format)
TIME OSD FORMAT : Time format of live-image.
TOP-WHITE : Time is displayed on top in white
TOP-BLACK : Time is displayed on top in black
BOTTOM-WHITE : Time is displayed at the bottom in white
BOTTOM-BLACK : Time is displayed at the bottom in black
OFF : There is no time displayed in the live-image.
TIME STAMP FORMAT : Time format of plays back mode.
TOP-WHITE : Time is displayed on top in white
TOP-BLACK : Time is displayed on top in black
BOTTOM-WHITE : Time is displayed at the bottom in white
Page 35