To install SIM and SD cards:
1. If the Q phone is on, press and hold the Startup & Shutdown button, then
select Shut Down → OK to turn off the Q phone.
2. Use the card pin to insert the hole at 90° to eject the card holder.
3. Insert the SIM card, and/or SD card into the SIM card holder. Smoothly push
the card into this card holder according to the direction indicated by the lost
corner of the card.
CAUTION. Use a regular card provided by the service provider. The cut
cards damage the card slot.
Use only the charger and USB cable of this Q phone. Otherwise, it may
cause the battery to explode or damage your Q phone.
When the battery power is low, the Q phone will give out a warning sound
and display low battery message. If the battery power is too low, the Q phone
will automatically shut down. You need to recharge the battery before you can
continue to use the Q phone.
Use travel charger to charge the battery
1. Insert the small end of the plug of the travel charger into the multi-function
jack.
5
