▪
If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem on
product operating. Make sure the using voltage does not /-
5% of the rated voltage.
▪
If lens or body of the product is contaminated by chemicals such as
thinner, benzene, the product can be damaged, discolored or
deformed. Please be careful.
▪
Do not give strong impact to the product. It can be a reason of wire
disconnection or short circuit.
▪
Do not strongly pull the wire out from the product. It can cause a
disorder.
Situation
Main reason
Solution
Non- Lighting Partly
LED is partly damaged,
supplying higher voltage
then rated voltage.
Making Sure Using
Voltage
Feeble Lighting
Supplying Voltage Lower
Than Rated Voltage
Making Sure Using
Voltage
Lighting but
Non-Flashing
Wrong Operating L/LF
Selection Switch
Convert L/LF Selection
Switch
Problem L/LF Selection
Switch
Contact QLight or Their
Agent
Neither Lighting nor
Flashing
Wrong Wiring
Making Sure Wiring
No Power Supply
Making Sure Power Supply
www.microlectra.nl [email protected]
Microlectra bv.
Augustapolder 12. 2992 SR Barendrecht. The Netherlands.
www.microlectra.nl [email protected]
