Q125L/Q125LP/Q125LW
Thank you for purchasing QLight products. Please read this manual
carefully before installing this product for safe and long use.
▪
Having long life of light source by adopting high-brightness LED
and suitable for machines having lots of vibration and impact with
high durability.
▪
Excellent in diffusing effect by employing our own unique direct-
diffusion system.
▪
Possible to select suitable operation by using built-in
steady/flashing selection switch according to the purpose of use.
▪
Possible to install various way according to installing condition.
Q125LW: Wall mounting type, Q125LP: Pole mounting type
▪
Material : Lens-PC, Body-ABS, PIPE-AL, BRACKET-ABS
▪
Flashes(when flashing) : 60~80/min.
▪
BUZZER : 80±3dB at 1M (it is optional item)
▪
Protection : IP65
Model
Voltage
Current
Weight
Flashes
Color
Q125L
DC12V
0.235A
0.23Kg
60~80/min.
Red-R
Amber-A
Green-G
Blue-B
DC24V
0.13A
0.23Kg
AC110V
0.062A
0.25Kg
AC220V
0.042A
0.25Kg
Q125L
Q125LW
Q125LP
Power line UL1015-NO.18 (0.75sq) x 2C 400mm comes out from the
product.
▪
In case of product using AC voltage, connect the line without
Polarity(wire color).
▪
In case of product using DC voltage, black line is negative(-).
▪
If possible, please mount as the direction of vertical and at the
place where low vibration and low impact.
▪
Please make a suitable hole on the place where the product will
be mounted by a Drill by referring to dimension on the below
drawing.
▪
In case of direction mounting type, fix the product by using
Nuts(M4-3EA) attached on mounting bolt on the bottom of the
product.
▪
In case of pole mounting type, mount it by using nuts attached
on the Pole.
▪
Mount it by using mounting bolts M8-2EA for L-type bracket and
mount it by using another mounting bolts M5-4EA for Wall
mounting type and round type bracket.
OPERATING MANUAL
LED Steady/Flashing Light
www.microlectra.nl
