5
If your PC does not have a functioning Firewire port, you must install the IEEE 1394 PCI card that came
with your camera.
If necessary, install the supplied IEEE 1394 PCI card:
•
Shut down your computer.
•
Open the case, and install the supplied IEEE 1394 card into an empty PCI slot. See the user’s
manual for your computer for complete instructions on installing new PCI cards.
•
Restart your computer. Windows should automatically install the appropriate software
drivers for the card.
Step 2. Install Your Imaging Software
Once the IEEE 1394 card is installed in your computer, you are ready to install the Firewire drivers and
imaging software. See your Imaging Software User’s Guide for complete installation instructions.
Step 3. Connect the Retiga 4000R
Once your imaging software is installed, connect your camera. There are two different types of
connections. In most cases, the Firewire cable provides the necessary power required by the Retiga
4000R. However, if your camera is cooled you may need to provide additional power to the camera
in one of the ways listed in the following figures. Most noteably, you will need to either connect your
camera with a 1394 power supply or through an IEEE 1394 HUB. Both items are available from your
QImaging dealer.
Содержание Retiga 4000R
Страница 1: ......
