Q-Free
ITS-950 ParQSense Base station Installation Manual
Page 5 of 12
2 PREPARATION OF THE INSTALLATION
Q-Free recommends the procedure described in this section for preparation of the installation.
There are tasks that must be prepared and ready before the onsite installation work can be initiated. This
is important to economize time when the equipment is
to be installed at a “live” site. All parts, equipment,
and cabling must be procured and available on-site prior to arrival on-site. All local laws and regulations
must be followed.
2.1 Overview
The ITS-950 ParQSense Base Station is part of the latest development in on/off-street parking monitoring
from Q-Free. Harnessing more than thirty years of experience in design of microwave radios, makes this
development unique in the market. The ITS-950 ParQSense Base Station communicates to the ITS-420
ParQSense Standard Outdoor Sensors which combine multiple sensing technologies ensuring maximum
detection accuracy. Typical applications are on/off-street monitoring for public, private lots/spaces, Smart
City Initiatives, etc.
The Q-Free ITS-950 ParQSense Base Station is of slimline design to be installed onto lighting poles,
building roof-tops/sides, etc. The installation process is easy and expected to take about 30 minutes for
each ITS-950 ParQSense Base Station.
Connection to the ParQSense Software Engine is easy with:
Wired Ethernet
Wireless via 3G cellular connection (project specific SIM card required)
3 MECHANICAL SPECIFICATIONS
The physical dimensions of the Q-Free ITS-950 ParQSense Base Station are:
Length: 350 mm/13.8 inch
Depth: 300 mm/ 11.8 inch
Height: 75 mm/3 inches
Weight: 2,5 kg/ 5.5 lbs.
Figure 1 ITS-950 Base Station
