Q Experience QAA14AV013, Инструкция по эксплуатации

Страница: 8 / 9

7
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
- Ensure that the AC cord of the apparatus is
connected properly.
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
Remote control does not work
- Before you press any function button, first
select the correct source.
- Reduce the distance between the remote
control and the unit.
- Insert the battery with its polarities (+/-) aligned
as indicated.
- Replace the battery.
- Aim the remote control directly at the ensor
on the front of the unit.
No Response From the Unit
- Disconnect and reconnect the AC power plug,
then turn on the unit again.
Tips:
- If there is an existing connection, press PAIR
button on the remote control or press on
the front panel of the unit for a few seconds. It
will re-activate the pairing mode.
- If there's no other Bluetooth device pair with
this player in two minutes, the player will
recovery previous connection.
- The player will also be disconnected when
your device is moved beyond the operational
range.
-
If you want to reconnect your device to this
player, place it within the operational range.
- If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected with the player.
- If bluetooth connection is lost follow the
instruction above to pair your device to the
player again.
Listen to music from Bluetooth device
z If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
z If the device also supports Audio Video
Remote Control Profile (AVRCP) profile, you
can use the player's remote control to play
music stored on the device.
1. Pair your device with the player.
2. Start playing music via your device (if it
support A2DP)
3. Use supplied remote control to control
play(if it support AVRCP)
- To pause/resume play, press the
BF
button on remote control or button
on front panel of unit.
- To skip to a track, press the
H
/
G
buttons.