13
Q6: M2.5 5 round head
black screw
A
D
B
Q3: M4
1.25 stainless
steel wood screw
Figure 19
Figure 20
2) Fix the pedestal assembly on the ceiling (Figure 20).
3) Aiming the “MARK” on the ball at the notch on the pedestal, push the ball upward to
the end and rotate clockwise until it is clicked (as shown on Figure 21).
4) Put the decoration ring near the ceiling and rotate it clockwise until it is tightened
(Figure 21).
5) Figure 22 shows the system is installed.
6) The names of some parts are as follows:
A Base Plate
B Pedestal C Decoration Ring
D Pedestal Assembly
Mark
Figure 22
C
Figure 21
4.
Indoor embedded installation
Notice: The thickness of the ceiling to install speed dome must be
1.65
inch (4.2 cm) and
0.38 inch (0. 8cm).
Notice: The ceiling should withstand 4 times the load of the speed dome
weight.
1) It has the drill map in embedded bracket tip the black parts of double paper, the central of drill
map have a red spot, which is central spot (reference to Figure 31)
