5
3 SAFETY INSTRUCTIONS
DANGER! Danger due to electric shock!
A solar module generates electricity and voltage even at a low intensity of illumination. Arc-
ing can occur when contacts in a live electrical circuit are physically disconnected. This can
result in grave or mortal injury. The severity increases when several modules are connected.
•
Never disconnect plugs when under load. Be aware that even without the presence of
daylight, residual charge may still be present in the plant. Ensure that the modules are
first disconnected from the inverter prior to opening any contacts in the solar installation.
•
Cover the solar modules with opaque material for the entire duration of assembly. Only then
is the module reliably de-energised.
•
The regulations and safety instructions for the installation of electrical devices and systems
must be observed.
•
In the case of module or phase voltages of more than 120 V, the extra-low voltage range is
left. Undertake the necessary protection and cautionary measures.
•
Do not insert electrically conductive parts into the plugs and junction box. Do not touch the
contacts or exposed terminals.
•
Keep children and unauthorized people away from the modules.
•
In case of damaged modules or operational errors of the solar array, always contact your ins-
taller or the Q-Cells Technical Costumer Service (see Chapter 6).
WARNING! Danger of injury due to broken glass! Risk of injury due to falling modules!
The modules are primarily made of glass and must therefore be handled with appropriate cau-
tion.
•
In order to ensure safe mounting, orient yourself to the national regulations for work safety
and accident prevention.
•
Wear suitable protective clothing (e.g. safety shoes, protective gloves) in order to prevent
injuries.
•
Protect the modules against scratches and other damage, especially from impact at the
edges or improper storage.
•
Do not subject the module surfaces to mechanical stress. Do not stand on the modules. Do
not drop or place objects on the modules.
• Only carry out modifications of the module that have been confirmed by Q-Cells in writing
in advance. Do not carry out any extra drilling (e.g. for fasteners) on the solar module.
•
Do not open the junction box under any circumstances.
•
Do not use light concentrators (e.g. mirrors or lenses) in attempting to increase the capacity
of the module. The module may be damaged. This also voids the warranty.
•
Transport the module in its original packaging until installation.
•
Use a glass suction cup to remove and transport a module or hold the module at the edges.
Carry the module vertically over longer distances.
•
Do not lift or move the module using the cables or at the junction box under any circum-
stances!
•
Store the modules securely in cool and dry rooms. The packaging is not weather-resistant!
•
Do not rest the module unprotected on its edges. This can damage the module and the
frame.
SAFETY INSTRUCTIONS
PRODUCT PROTECTION
INSTALLATION AND OPERATION MANUAL FOR CIGS SOLAR MODULES Q-CELLS SE
3.1 TRANSPORT AND STORAGE
