2
3
INSTALLATION AND OPERATION MANUAL FOR FLAT ROOF SYSTEM Q.FLAT-G5 – Q CELLS
INSTALLATION AND OPERATION MANUAL FOR FLAT ROOF SYSTEM Q.FLAT-G5 – Q CELLS
The Q CELLS Q.FLAT-G5 flat roof system (also referred to as
“Q.FLAT-G5”) enables solar energy to be directly converted
into electrical energy in an environmentally friendly manner.
In order to utilise the full performance of the Q.FLAT-G5,
please read the following manual carefully and follow the
instructions contained therein. Failure to do so may result in
personal injury and property damage as well as loss of output.
Symbols
Throughout this installation manual, symbols are used for the
purpose of quick and easy comprehension.
SYMBOL
DESCRIPTION
Ä
Action with one or more steps.
•
List
Check when performing an action; check the
result of an action.
Incorrect execution of an action.
Warning of danger or damage.
Differentiation into:
•
Danger: Danger of death
•
Warning: Serious injury or damage to
property
•
Note: Product damage
This installation and operating manual describes the necessary
procedures to ensure safe installation, operation and recycling
of the Q.FLAT-G5.
Ä
Q.FLAT-G5 may only be installed with Q CELLS solar mod-
ules with the dimensions 1670 mm × 1000 mm × 32 mm
(e.g. Q.PEAK-G4.1) or 1685 mm × 1000 mm × 32 mm (e.g.
Q.PEAK DUO-G5), including frame.
Ä
Read this installation and operation manual carefully before
starting the assembly.
Ä
Keep this installation and operation manual safe for the entire
service life of the Q.FLAT-G5 flat roof system.
Ä
Ensure that this installation and operation manual is accessible
to the operator at all times.
Ä
This installation and operation manual must be handed to
every subsequent owner or user of the Q.FLAT-G5 flat roof
system.
Ä
Insert any supplements provided by the manufacturer.
Ä
Observe any other applicable documents.
Ä
Observe the wiring and dimensioning requirements for the
Q.FLAT-G5 system.
Intended use
The Q.FLAT-G5 flat roof system is only permitted for use on flat
roofs with an inclination of 0°-5° and a maximum roof height of 35 m.
•
The Q.FLAT-G5 is only suitable for use with solar modules that
have been expressly approved by the manufacturer.
Ä
If installation or operation of the Q.FLAT-G5 is not in accord-
ance with the requirements described in this installation and
operation manual, please contact Hanwha Q CELLS GmbH
or one of its certified contractual partners.
DANGER
!
Danger to life due to electric shock!
Ä
Use of the Q.FLAT-G5 in a manner that is not authorised by
Hanwha Q CELLS GmbH, in particular the use of solar modules
that are not expressly approved, may lead to personal injury,
property damage and loss of output.
Safety regulations
The operator of the Q.FLAT-G5 is responsible for compliance with
all relevant regulations and guidelines. The operator is responsible
for checking the load-bearing capacity and ballast on the roof.
WARNING
!
Danger of falling due to unsecured roof ac-
cess!
Ä
Never enter the installation area alone or when
unsecured.
Ä
The Q.FLAT-G5 may only be commissioned, operated and
maintained in accordance with the following documents,
regulations and standards:
•
Installation and operation manual for solar modules from
Hanwha Q CELLS GmbH and their safety regulations
•
Country-specific regulations on occupational health &
safety, dangerous goods and environmental protection
•
System-specific provisions and requirements
•
Valid country-specific laws, regulations and rules for the
planning, installation and operation of solar power systems
and work on roofs
•
Valid international, national and regional regulations, in
particular those governing the installation of electrical
equipment and installations, working with direct current, and
regulations governing the parallel operation of solar power
systems issued by the relevant power supply company
•
Accident prevention regulations
•
Regulations issued by the German construction trade
association (“Bau-Berufsgenossenschaft”)
1 INTRODUCTION
DOCUMENT REVISION 01
This document is valid in United Kingdom and Ireland from June 2019 onwards.
It remains subject to change. When carrying out the installation and operation of the Q.FLAT-G5 flat roof system, the data sheets and other information published by the manufacturer
at the time of purchase of the system or the components shall be considered valid unless the purchaser or operator is informed of more up-to-date requirements.
TABLE OF CONTENTS