background image

Thank you for purchasing this 

Q-Audio 

product, we are sure that it will serve you for many years to come. 

To optimise the performance of this product, please read these operating instructions carefully to familiarise 

yourself with the basic operations of this unit. Please retain them for future 

reference. This

 unit has been tested 

at the factory before being shipped to you.  

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. To prevent a fire 

hazard, do not expose the unit to any naked flame sources. Unplug this apparatus during lightning storms or if it is 

unlikely to be used for long periods of time. 

When installing the unit, please ensure you leave enough space around the unit for ventilation. Slots and openings 

in the unit are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. 

To prevent fire hazard, the openings should never be blocked or covered. 

If the unit is powered by the mains, always handle the power cable by the plug. Never pull out the plug by pulling 

on the cable. Never touch the power cable when your hands are wet as this could cause an electric shock. Do not 

tie a knot in the cable. The power cable should be placed such that it is not likely to be stepped on. A damaged 

power cable can cause a fire or give you an electrical shock. Check

 

the power cord periodica

l

ly, if you ever find 

that it is damaged, replace it before using the unit again. Contact your retailer for a replacement. 

The voltage of the available power supply differs according to country or region. Be sure that the power supply 

voltage of the area where this unit is to be used meets the required written on the unit. 

The lightning flash symbol inside a triangle is to alert the user to the presence 

of 

high voltage within the 

unit’s enclosure that may be of sufficient power to constitute a risk of electrical shock to persons.  

Caution: to prevent the risk of electric shock, do not attempt to open the unit. No user-serviceable parts 

inside. Refer all servicing to qualified service personnel.  

The exclamation mark inside a triangle is intended to alert the user to the presence of important operating 
and maintenance instructions in the literature accompanying the appliance.  

Select the installation location of your unit carefully. Avoid placing it in direct sunlight or locations subject to 

vibration and excessive dust. Do not use the unit where there are extremes in temperature (below 41ºF / 5ºC or 

exceeding 95ºF / 35ºC).  

Unpacking and safety

 Please unpack your new product carefully. Your new product should reach you in perfect 

condition. Please check that no damage has occurred during transit. If any damage is found, do not operate your 

unit. Please contact the retailer you purchased it from immediately. If there is any damage to the mains cable do 

not use the device. Always disconnect the unit from the mains supply when carrying out any cleaning of the unit. 

Manufacturer declarations 

In compliance with the following requirements: RoHS Directive (2011/65/EU) and WEEE Directive (2012/19/EU), 

and Battery Directive (2006/66/EU). If this product is ever no longer functional please take it to a recycling plant 

for environmentally friendly disposal. Any supplied batteries can also be recycled. 

CE declaration of conformity 

RED Directive (2014/53/EU),EMC Directive (2014/30/EU),Low Voltage Directive (2014/35/EU). 

The declarations are available on application from [email protected] 

Before putting device into operation, please observe the respective country-specific regulations. 

Содержание QWM 6

Страница 1: ...re Q Audio range visit www q audio co uk Telephone 44 0 203 598 5164 Email info q audio co uk Web www q audio co uk If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal Due to continuous product development specifications and appearance are subject to change Copyright Q Audio E OE QWM6 QWM11 VHF wireless microphone systems 174 1 174...

Страница 2: ...e required written on the unit The lightning flash symbol inside a triangle is to alert the user to the presence of high voltage within the unit s enclosure that may be of sufficient power to constitute a risk of electrical shock to persons Caution to prevent the risk of electric shock do not attempt to open the unit No user serviceable parts inside Refer all servicing to qualified service personn...

Страница 3: ...na A B QWM 11 dual wireless receiver 1 Power indicator 2 Channel A signal indicator 3 Channel B signal indicator 4 Channel A output level control 5 Channel B output level control 6 Channel B balanced XLR output socket 7 Channel A balanced XLR output socket 8 Unbalanced mixed jack output socket 9 DC power input socket 10 Power on switch 11 Antenna A B 5 1 2 4 6 8 9 10 7 3 8 11 11 5 1 2 4 6 8 7 3 ...

Страница 4: ... power outlet Using the QWM 11 wireless receiver 1 Connect outputs for channel A B to your mixer amplifier either two balanced XLR cables for dual output or a single unbalanced 1 4 inch jack plug cable for mixed output of both channels 2 Connect the AC adapter to the receiver and plug into an appropriate power outlet Using the wireless microphone transmitter s 1 Slide the mic ON OFF STANDBY switch...

Отзывы: