Q-Audio QWM 1940 V2 Скачать руководство пользователя страница 2

Thank you for purchasing this 

Q-Audio 

product, we are sure that it will serve you for many years to come. 

To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself 
with the basic operations of this unit. Please retain them for future 

reference. This

 unit has been tested at the factory 

before being shipped to you.  

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. To prevent a fire 
hazard, do not expose the unit to any naked flame sources. Unplug this apparatus during lightning storms or if it is 
unlikely to be used for long periods of time. When installing the unit, please ensure you leave enough space around 
the unit for ventilation. Slots and openings in the unit are provided for ventilation to ensure reliable operation of the 
product and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered. 

The unit is mains powered, always handle the power cable by the plug. Never pull out the plug by pulling on the 
cable. Never touch the power cable when your hands are wet as this could cause an electric shock. Do not tie a knot 
in the cable. The power cable should be placed such that it is not likely to be stepped on. A damaged power cable 
can cause a fire or give you an electrical shock. Check the power cord 

periodically

, if you ever find that it is 

damaged, replace it before using the unit again. Contact your retailer for a replacement. 

The voltage of the available power supply differs according to country or region. Be sure that the power supply 
voltage of the area where this unit is to be used meets the required written on the unit. 

The lightning flash symbol inside a triangle is to alert the user to the presence 

of 

high voltage within the 

unit’s enclosure that may be of sufficient power to constitute a risk of electrical shock to persons.  
Caution: to prevent the risk of electric shock, do not attempt to open the unit. No user-serviceable parts 
inside. Refer all servicing to qualified service personnel.  
The exclamation mark inside a triangle is intended to alert the user to the presence of important operating 
and maintenance instructions in the literature accompanying the appliance.  

Select the installation location of your unit carefully. Avoid placing it in direct sunlight or locations subject to vibration 
and excessive dust. Do not use the unit where there are extremes in temperature (below 41ºF / 5ºC or exceeding 
95ºF / 35ºC).  

Unpacking and safety

 Please unpack your new product carefully. Your new product should reach you in perfect 

condition. Please check that no damage has occurred during transit. If any damage is found, do not operate your 
unit. Please contact the retailer you purchased it from immediately. If there is any damage to the mains cable do not 
use the device. Always disconnect the unit from the mains supply when carrying out any cleaning of the unit. 

Manufacturer declarations 

In compliance with the following requirements: RoHS Directive (2011/65/EU) and WEEE Directive (2012/19/EU), and 

Battery Directive (2006/66/EU). If this product is ever no longer functional please take it to a recycling plant for 

environmentally friendly disposal. Any supplied batteries can also be recycled. 

CE declaration of conformity 

RED Directive (2014/53/EU),EMC Directive (2014/30/EU),Low Voltage Directive (2014/35/EU). 

The declarations are available on application from [email protected] 

Before putting device into operation, please observe the respective country-specific regulations. 

Содержание QWM 1940 V2

Страница 1: ...t from the Q Audio website For the latest updates and information on the entire Q Audio range visit www q audio co uk Telephone 44 0 203 598 5164 Email info q audio co uk Web www q audio co uk If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal Due to continuous product development specifications and appearance are subject to chang...

Страница 2: ...uired written on the unit The lightning flash symbol inside a triangle is to alert the user to the presence of high voltage within the unit s enclosure that may be of sufficient power to constitute a risk of electrical shock to persons Caution to prevent the risk of electric shock do not attempt to open the unit No user serviceable parts inside Refer all servicing to qualified service personnel Th...

Страница 3: ...for mixed 20 Infrared connect window audio output from both channels 21 Compartment for 2 x AA 1 5V batteries 11 DC power supply input socket 22 Battery compartment flip out cover Operation Before operating the system ensure that you have installed fresh new batteries in the mic or bodypack transmitters Receiver operation 1 Connect audio outputs for channel A and B to your mixer amplifier PA speak...

Страница 4: ...ceiver and the volume controls on your connected mixer amplifier PA speaker system you should hear the signal coming through and you can adjust the volumes to suit your performance VERY IMPORTANT if you wish to run 2 receivers and 4 transmitters together and to avoid interference between the two systems it is recommended you use the following setup Unit 1 set channel A to frequency 1 and set chann...

Отзывы: