Q Acoustics Q-BT3, Инструкция по эксплуатации

Страница: 7 / 20

No Light = Off
Power cord is connected but AC switch is turned OFF.
Solid Red= Off (Standby)
Power cord is connected and AC switch is turned ON,
but Q-BT3 is OFF.
Solid Green = On
Analogue input (Line in 1 or Line in 2) is the active
source.
Solid White = On
Optical input is the active source.
Quick Blue Flash = On
Bluetooth input is the active source and is currently
searching for a Bluetooth device to PAIR with.
Solid Blue = On
Bluetooth input is the active source and is PAIRED with
a Bluetooth device.
Any Colour Slow Flash = On
Currently active source is MUTED.
Instructions
TOP PANEL
1. Standby / Source Select
Long press / short press
2. Volume Down
Single press / press and hold
3. Volume Up
Single press / press and hold
4. Status LED
See LED indications below
Q-BT3 Features
7
2 1
4 3
FRONT VIEW
1 2
1. IR Sensor
The IR sensor is hidden behind the speaker grill of the active right speaker. It ‘sees’ the IR control
commands output from the Q-BT3 IR remote control when buttons are pressed.
This sensor MUST be unobstructed for direct line-of-sight to the remote, or the remote will not be
able to control the Q-BT3.
2. Rotating Badge
The Q-BT3 speakers are designed to be used in both vertical and horizontal orientations to suit
your preferred setup.
When using Q-BT3 in the horizontal orientation, you may rotate the Q Acoustics logo by gently
pulling and rotating the badge.