Q Acoustics M2 Скачать руководство пользователя страница 18

Страница: 18 / 24

You should first listen to your setup with LSG

™

= 1

If you find your signal level to be quite low from your TV/DVD player/Music source, please select LSG

™

= 2.

Please Note:

You will not require the LSG

™

if you are using a Streamer/CD player Optical output. Hi-Fi

audio equipment will output FS digital audio. Audio will be highly distorted if you have LSG

™

= 2 in this

scenario.

8. Source volume control

Audio sources will initially be set at a DEFAULT volume level. The volume can be adjusted separately for
each source using the VOL + and VOL – buttons on the Top Panel or IR remote. Once adjusted, the IPA

™

will remember the new volume level for the currently selected source, and will return to that level each
time that source is re-selected.

9. Bluetooth

9.1. Pairing a Bluetooth

device

The unit is designed to be Discoverable when in STANDBY, to allow AUTO ON. It is also designed to
automatically go into Pairing mode if there is no Bluetooth

device connected. To Pair your Bluetooth

source:
1. Connect the AC Mains Cable to the Unit and switch ON.
2. Make sure Bluetooth

is enabled on the device to be Paired. The Bluetooth

controls are typically

found in the device’s ‘Settings’ or ‘Connections’ menu.
3. On your device’s list of discoverable devices, you should now see ‘Q M2’.
4. Select ‘Q M2’ and your device will now be Paired via Bluetooth

and Connected.

5. From within the music player on your device, select ‘Q M2’ as the audio output and press Play. Unless
the remote has been used to manually select another source and override the IPA

™

, or a higher priority

source is active, the Unit will switch to Bluetooth

input and the LED will turn Blue.

9.2. Pairing a Bluetooth

device with NFC

1. Connect the AC Mains Cable to the unit and switch ON.
2. Make sure Bluetooth

and NFC are enabled in the device settings.

3. Place NFC device on the top surface of the Unit, in the location indicated.

Please Note:

You may need to rotate your device for NFC to connect, as NFC coils are in different

locations within different devices. Please see your device instruction manual for correct NFC operation.

The distance needed for successful NFC Pairing can vary from device to device.
4. The NFC device will automatically register on screen when an NFC connection has been made.
5. Follow on-screen instructions to complete NFC Pairing. This usually involves selecting to allow NFC
Pairing.
6. Your device will now be Paired, and Connected via Bluetooth

, and will function as any other Bluetooth

source when pressing Play from within the device music player.

Please Note:

Although starting to Play a track on the connected source will cause the Unit to switch to

Bluetooth

, the Unit will stay on Bluetooth

until the source is Disconnected. It will not switch to a lower

priority source whilst the player is Paused.

Please Note:

The IPA

™

will switch to Bluetooth