Install batteries using the following steps:
1. Remove the battery compartment cover by loosening the two screws.
2. Remove old batteries and dispose of them properly.
3. Following the positive and negative terminal signs in the compartment bottom, snap four new AA
alkaline batteries firmly into the battery holder.
4. Replace the battery compartment cover and ensure that the sealing O-ring is lying flat on the battery
holder.
5. Fasten the two screws.
*
NOTE
*
Failure to properly seat the O-ring may result in water damage to the SP-380.
5
Instrument Overview
5.1
Control Keys
The SP-380 has three control keys, as shown in Figure 2. The left (
), right (
), and ok (
) keys
are used to launch actions indicated on the LCD display directly above the keys. The labels above the keys
indicate the function associated with each key and functions can be changed in different operation modes.
Figure 2.
5.2
Main Module On/Off
To turn on the SP-380
: Press
momentarily and release.
To turn off the SP-380
: Press and hold
for about three seconds. Release
when the LCD display
turns off. The SP-380 turns itself off after 60 seconds without user interaction detected. This is done to
conserve battery life.
*
NOTE
*
This auto-time off setting may be customized by the user as desired through the
uPyxis®
Mobile or Desktop App.
SP-380 User Manual
| +1 (866) 203-8397
5
Содержание SP-380
Страница 1: ...Images _manualcover jpg...
