13. The SP-380 will take the sensor PTSA measurement three times to verify the calibration (Figure 21).
*
NOTE
*
It takes about one minute for the sensor to approach the calibrated reading
and the three verifying readings may not be exactly the same as the value measured
by the SP-380Ṗress
Read
(
) again to take more readings from the sensor, if nec-
essary.
14. If the calibration is successful, a ”Verify calibration - OK” message will appear on the top of the display
(Figure 22).
15. Calibration is now complete. Long press
Calib
(
) to return to measurement mode.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
SP-380 User Manual
| +1 (866) 203-8397
14
Содержание SP-380
Страница 1: ...Images _manualcover jpg...
