Pyxis 53709, Руководство пользователя

Страница: 12 / 27

4.3 Pipeline Installation
The ST-773 may be installed in a pressurized inline flow application as high as 75 psi (5Bar) using optional
accessories (Pyxis ST-001/Collar Kit or ST-771 1-inch Threaded Adapter Kit). Pyxis recommends installation
in a vertical flow format from bottom up to reduce the impact of air bubbles. Install the probe collar on the
sensor and then install the sensor into the ST-001 tee assembly and ensure the DCC-6 membrane cap is in
the direction of water flow as shown in Figure 4.
Figure 4. ST-773 in a pipeline installation using optional ST-001 Tee Assembly Kit (P/N -53726) or 1-inch
Thread Adapter Kit (50700-A04)
ST-773 User Manual service@pyxis-lab.com | +1 (866) 203-8397 9