Pyxis 50626, Руководство пользователя

Страница: 6 / 20

Table 2. ST-730SS Specifications
Specifications
*
ST-730SS
Part Number (P/N) 50626
Turbidity Range 0–100 NTU
Turbidity Resolution 0.1 NTU
Turbidity Accuracy ±2% of reading
Method Nephelometric, with white LED and IR LED (860 nm) light sources
Calibration Two-point calibration against standard solution
Outputs 4–20mA Analog Output, RS-485 Digital Output with Modbus protocol
Installation 3/4” FNPT threaded ports
Cable Length 5 ft, with IP67 connectors
Power Supply 22–26 VDC, 1 W
Dimension See Figure 4
Weight 2.5 lbs (1130 g)
Material 304 Stainless Steel
Operational Temperature 32–104 °F (0–40 °C)
Storage Temperature 20–150 °F (-7–66 °C)
Pressure Up to 290 psi (2.0 MPa) at 149 °F (65 °C)
Enclosure Rating IP66
Regulation CE
*
With Pyxis’s continuous improvement policy, these specifications are subject to change without notice.
3 Unpacking Instrument
Remove the instrument and accessories from the shipping container and inspect each item for any damage
that may have occurred during shipping. Verify that all accessory items are included. If any item is missing
or damaged, please contact Pyxis Lab Customer Service at
service@pyxis-lab.com .
3.1 Standard Accessories
• Tee Assembly 3/4” NPT (1x Tee, O-ring, and Nut) P/N: ST-001
*
NOTE
*
ST-001 is not included for ST-730SS
• 7-Pin Female Adapter/Flying Leads Cable (2 ft) P/N: MA-1100
• User Manual available online at https://pyxis-lab.com/support/
ST-730 Series User Manual service@pyxis-lab.com | +1 (866) 203-8397 3