10
© 2012 Directed. All rights reserved.
Basic Commands (Direct Access)
No Confirmation LEDs on
Arm
Press
and
release
The alarm arms, doors lock (if connected), and the siren chirps and
parking lights flash once. The Arm LED and beeps play to confirm. If
Valet mode* is On, the doors lock and the Arm LED,
LED and a
fault tone plays. Exit Valet mode to arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
remote will emit a Trigger Zone Fault Report**, the Arm LED,
LED
and a fault tone plays.
To Arm and Panic
Press
and
hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the parking lights. The confirmation LEDs
flash and siren tones play to confirm.
Press
the
or
button
to stop the output.
Disarm
Press
and
release
The alarm disarms, doors unlock (if connected), and the siren chirps
and parking lights flash twice. The Disarm LED and beeps play to
confirm. If Valet mode* is On, the doors unlock and the Disarm LED,
LED and fault tones play.
An Alarm Report** will replace the disarm output if the alarm was
Содержание 5206P
Страница 1: ......
