Pythia Technologies Inc. - 740-363-2272
www.pythiatech.com
10
Connect/Open the communications session. NOTE: DO NOT POWER ON MS0 YET.
Simultaneously, press and hold the “X” key and power on the MS0.
NOTE: The MS0 must be power cycled and the “X” key held down to enter setup mode.
When prompted, press the “Enter” key” and following the instructions above for configuring the
MS0.
© 2016 Pythia Technologies, Inc. All rights reserved. No part of this document may be transmitted or reproduced in any
form without retention of Pythia Technologies Inc.
175 S. Sandusky Street, Suite 321 Delaware OH 43015 Tel. 740.363.2272
[email protected]. [email protected]