WARNINGS AND SAFETY GUIDELINES
Before using the
Piccolo2
and its sensors, read carefully the
instructions and user manuals for the oxygen meter
Piccolo2
.
In case of problems or damage, disconnect the instrument and
mark it to prevent any further use! Consult
PyroScience
for advice!
There are no serviceable parts inside the device. Please note that
opening the housing will void the warranty.
The
Piccolo2
is not watertight, is sensitive to corrosive conditions
and to changes in temperature causing condensation. Avoid any
condition (e.g. direct sun light) causing a heating of the device
above 50°C (122°F).
Handle the sensors with care especially after removal of the
protective cap. Prevent mechanical stress to the sensing tip.
The sensors and the oxygen meter
Piccolo2
are not intended for
medical or military purposes or any other safety-critical
applications. They must not be used for applications in humans;
not for in vivo examination on humans, not for human-diagnostic
or any therapeutic purposes. The sensors must not be brought in
direct contact with foods intended for consumption by humans.
The device and the sensors must be used in the laboratory by
qualified personnel only, following the user instructions and the
safety guidelines of the manual, as well as the appropriate laws
and guidelines for safety in the laboratory. Safety data sheet for
the calibration capsules (OXCAL) is available on the homepage.
Sensor calibration and application are on the user
’s
authority, as
well as data acquisition, treatment and publication.
Keep the sensors and the
Piccolo2
out of reach of children!
