Pyronix HIKVISION HEAT-WE, Руководство по установке

Страница: 10 / 24

10
WHERE NOT TO INSTALL
GENERAL
Do not install...
•
In environments where the ambient temperature can exceed 40°C or be below 0°C
•
Where heat/steam could cause false alarms such as directly above ovens or kettles etc.
•
On surfaces that are normally warmer or colder than the rest of the room (e.g. attic
hatches) as temperature differences may stop smoke or heat from reaching the unit.
•
In close proximity to anything that can create airflows such as air conditioning units,
windows, vents or heaters.
•
Anywhere that not easily accessible to silence false alarms or test/replace the battery.
•
Near any objects that could cause electrical interference such as dimmer switches or
proximity readers.
•
Within 1.5m of fluorescent light fittings as the electrical noise or flickering may affect the
unit.
SMOKE DETECTORS
Do not install...
•
In bathrooms, kitchens, shower rooms, garages or other rooms where the smoke alarm
may be triggered by steam, condensation, normal smoke or fumes.
•
Within 6 metres from sources of normal smoke/fumes.
•
Near very dusty or dirty areas. Build-up of dust or dirt in the chamber will impair
performance. It can also block the insect screen mesh and prevent smoke from entering
the chamber.
•
In insect infested areas. Small insects getting into the smoke detector chamber can cause
intermittent alarms.
HEAT DETECTORS
Do not install...
•
In, or close to bathrooms, shower rooms or other rooms where the unit may be triggered
by steam or condensation.