Rins139 Issue 4
Walk Test
Press
Use the down
scroll key to display
´ZDONWHVWµ
Press
to accept.
Use the up/down
scroll keys to display the Set mode required. e.g..
´VHWDµ
Press
to accept.
Display reads
´HQWHUFRGHµ
Enter the Master User Code
.
Press
to accept.
Walk test the system, each zone triggered during walk test will be entered in the event log.
Enter Master Code
to exit walk test mode.
Pulse PGM
Press
Use the down
key to display
´38/6( 3*0µ
or the new label programmed by the
engineer.
Press
to accept. The dual tone is heard on acceptance and
´RSHUDWLQJµ
is displayed.
If
´127$87+25,6('µ
is displayed the option has not been configured by the engineer.
Accept Calls
Press the menu key
Use the down
key to display
´DFFHSWFDOOVµ
.
Press
to accept. The dual tone is heard on acceptance and
´+5$&7,9(µ
is displayed.
6
MASTER AND USER FUNCTIONS
Setting The Panel
Press
The display reads
´VHWV\VWHPµ
Press
to accept. Display reads
´VHWDµ
Use the down
scroll key to display the set mode required. e.g.
´VHWEµ
Press
to accept.
Enter user code
Exit timer starts countdown.
Exit the building.
Quick Setting
Enter user code
and press a function key
or
for the set
required.
Set With Omits
Press
Use the down
scroll key to display
´VHW:,7+20,76µ
Press
to accept. Display reads
´VHWDµ
Use the down
scroll key to display the Set mode required. e.g..
´VHWEµ
Press
to accept and enter a User Code
.
Display reads
´20,7=21(6µ
Enter zone or zone numbers to be omitted.
1. This can be done by two methods.
Either press a numerical key representing the required zone (the zone selected is then
displayed and accepted) and pressing the
key after all the zones have been selected.
or
2. Use the up/down
keys to display the required zone and selecting each
required zone using the
key. After all the required zones have been selected press
the
key to accept the programming.
Exit timer starts countdown.
Exit the building.
3
