1.Entering and exiting menu
Press MENU button on the remote controller once (or directly
press PICTURE button on the remote controller),PICTURE
menu displays on the screen; press MENU button
twice (or directly press SOUND button on the remote
controller), SOUND menu displays on the screen.
Press the menu button again (3 times, or directly press
TIME button on the remote controller), TIME menu displays
on the screen. Press the menu button again (4 times, or directly press FUNCTION button on the
remote controller), FUNCTION menu displays on the screen. Press the menu button again (5
times or directly press TUNE button on the remote controller), TUNE menu displays on the
screen. Press the menu button again (6 times), EXCHANGE menu displays on the screen .To
turn off the on-screen menu display, either press the EXIT button or allow the TV set to
automatically turn off the menu by not pressing any button for a few seconds.
2.Auto search
A. Press MENU button five times continually (or directly press TUNE button on the remote
controller), e
Press MENU button five times continually (or directly press TUNE button), ensure that the
TUNE menu is displayed. Press the CH+/- buttons to select SEARCH. Then press the VOL+
button to search up or VOL- button to search down to the next TV station.(It is much faster to
search up.) If the wrong station is found, press the search button again. You may need to
repeat this until the correct station is located. To store the new program, press the EXIT
button.
4.Fine tune
If the picture or sound is poor, try to use the "FINE TUNE" feature. Select the
FINE TUNE by using the CH +/- buttons. Use the VOL +/- buttons to fine tune the
sound and picture for optimum results. Then press the EXIT button to store the
results. Do not use this feature unless reception is poor.
nsure that the TUNE menu is displayed. Press the CH+/- buttons to select
AUTO SEARCH. Then press the VOL+ button, the TV set will begin to search programs
from present programme No..
B. After the search has finished, the TV set will return to the first program that is stored.
3.Search
TUNING
COLOR
SYSTEM
AUTO
BAND
VHFL
SKIP
OFF
PROG
NO
.
19
SEARCH
FINE TUNE
AUTO SEARCH
OPERATION MENU
5.Selecting color system
Usually this should be set in the auto position. However if the colors displayed on the screen
are incorrect you can manually select the correct color system. When you have finished
remember to turn it back to auto again so that other programs will still work correctly.
Use the CH+/- buttons to select COLOR
SYSTEM
then the VOL+/- buttons to select a
color system you need. Press the EXIT button to save the setting.
Setting Channel
5
6
Press the menu button once or press the PICTURE button
on the remote controller to display the picture setting
menu.
1.Contrast (adds depth to the picture)
Press the CH+/- buttons to select CONTRAST, then
press the VOL+/- buttons to adjust the contrast level.
2.Brightness (adds sparkle and shine to the picture)
Press the CH+/- buttons to select BRIGHTNESS, then press the VOL+/- buttons
to adjust the brightness level.
3.Colour (adds colour depth)
Press the CH+/- buttons to select COLOUR, then press the VOL+/- buttons to
adjust the colour level.
4.Sharpness (adds fine detail)
Press the CH+/- buttons to select SHARPNESS, then press the VOL+/- buttons to
adjust the sharpness level.
Note: Do not turn the sharpness up to high if the reception is poor or has lots of
noise as it will enhance the fine grain details.
5.Coring
Press the CH+/- buttons to select CORING, then press the VOL+/- buttons to turn
this feature on/off.
6
.
Picture
boost
Press the CH+/- buttons to select
PICTURE
BOOST, then press the VOL+/-
buttons to
turn
this
feature
on
/
off
.
7.Program skip
The program skip feature enables you to skip/hide programs that you do not
wish to be displayed when using the CH+/- buttons. These channels will still
be displayed by directly using the channel number buttons on the remote
controller. To skip , press the CH+/- buttons to select the SKIP menu, press the
VOL+/- buttons to tune the skip feature on/off. Press the EXIT button to save
the setting.
8.Program number
The program number is the remote control channel number. You can change the
program number to see channels stored without exiting this main menu. Press the
CH+/- buttons to select PROGR
No
.
, press the VOL+/- buttons to change the
program number that you are adjusting.
9.Band switching (Note: This is a new item.)
If you already know what band the channel is on, tuning can speed up by selecting
the correct band before going into the search menu. This feature should only be
used if you understand the channels in your local area.
Picture Adjustments
PICTURE
CONTRAST 89
BRIGHTNESS 66
COLOR
50
SHARPNESS 50
CORING
OFF
PICTURE
BOOST
OFF
IIIIIIIIIIIIIIIIIIIIIIIII..........
OPERATION MENU