Operating Manual: PX-1C - Smoke Alarm Device with Radio Link
EN
63
EN
8 Setting up a shared
radio group
7
Expanding a radio group
and learning mode
You can extend an existing radio group
by bringing the radio group in the learning
mode. In this regard observe the following:
(1)
Press and hold the radio button on
any device using a split pin.
(2)
Release the radio button as soon as
the LED goes out.
5
The radio group is in learning mode
for a maximum of 10 minutes.
(3)
To add further devices, see steps (5)
and (6) in chapter 6.1 “Setting up
8.1 Connecting radio groups
To connect radio groups with another,
proceed as follows:
(1)
Put the shared radio group into
learning mode.
f
See steps (1) and (2) in chapter 7
“Expanding a radio group and learn-
(2)
In the subgroups to be connected,
select the closest device to the
shared radio group.
(3)
Using the split pin, press the radio
button on the selected device for
1 second.
5
The subgroup is connected to the
shared radio group.
(4)
Repeat the process, if necessary, on
further subgroups.
