
USING YOUR KITCHEN SCALE
Always place the scale on a dry and flat surface prior to weighing.
1.
Press the “Power/Tare button” (3) to switch on.
2.
LCD screen (2) will turn on and the display will show “0”.
3.
Place the item to be weighed onto the platform (1). The weight will appear on the display.
4.
Press the “Power/Tare button” (3) to switch off.
Note: The scale will read “unSt” if the scale is not stable for weighing.
Note: The scale will read “Err” if it is trying to weigh above its capacity.
select mode:
After switching on the scale, touch the “Unit/Mode switch button” (4). Each time the button
is touched, the mode displayed will alternate among weight mode/milk volume mode/water
volume mode.
select weighing units:
After switching on the scale, press the «Unit/Mode switch button» (4). Each time the button is
pressed, the weighing unit displayed will alternate among ml / g / fl.oz / lb oz.
2.
Clip the battery cover back into place.
Note: During use, if the battery symbol “LO” appears on the screen, it means that
battery power is low and the batteries should be replaced.
batteries replacement:
1.
Unclip the battery cover (5) on the underside of the scale by pushing the clip inwards and
then lifting off. Remove the old batteries and fit the replacement (3xAAA),
2.
Clip the battery cover back into place
disposal of the old batteries:
Please refer to section for the correct disposal of the product.