pyrex SB-450 LUXX, Инструкция по эксплуатации

Страница: 15 / 20

12-13_ GB
1. press the lid release button “pUSh” (2) (fig. 1) and fill the
kettle with cold water (fig. 2).
HINT: Save Energy – Do not boil more water
than you need.
Attention! Make sure the water level does not
exceed the MAX indication.
2. place the kettle on the base (6) (fig. 3).
3. the water will boil and the kettle will switch off automati-
cally (fig.5). the light indicator (8) will turn on.
4. your kettle will boil and switch off automatically (fig. 5) and the light indicator (8) will turn off
5. Unplug the power cord.
To interrupt the boiling, ensure that the switch is on the “O” (OFF) position before
removing the kettle from the powerbase.
Your kettle is fitted with a filter to hold back limescale particles.
If you find drops of water under your kettle, don’t worry – it is just condensation.
Note: Do not leave water in the kettle after each use.
USe yoUr KettLe
light
fig.1 fig.2
fig.3 fig.4
fig.5