SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3550SS/3600SS
4
GETTING STARTED & PROGRAMMING
888.479.7264
SET UP
PROGRAMMING
1
1
2
2
3
4
Remove time clock from carton & place on a flat, level surface.
Unlock & remove top cover.
Connect power adaptor in port located behind display screen & plug unit
into AC wall outlet.
Use key to unlock and remove top/front
cover. Locate programming buttons la-
beled
SELECT,
s
(UP) &
t
(DOWN)
.
Press
SELECT
until desired feature is
displayed (see chart on page 5).
Press
s
(UP) &
t
(DOWN)
to scroll through
feature options.
Press
SELECT
to save option setting &
move to next feature.
WALL MOUNTING
Select a location convenient to employees
clocking IN & OUT. Be sure power outlet is
within 5 feet of mounting location.
Use masking tape to hold mounting template on
wall, making certain template is positioned so
bottom of time clock is approximately 45 inches
from floor.
Drill holes using template as a guide.
Remove template from wall & install #10 screws
(not included), leaving approximately 3/16 inch
of screws exposed. For sheetrock walls, use
plastic anchors.
Hang time clock on wall, aligning keyholes on the
rear with screw heads. Press downward on time
clock until it lowers onto screws.
Plug unit into AC wall outlet.
2
3
3
4
5
6
1
Содержание SMARTSITE 3550SS
Страница 1: ...pyramidtimesystems com User Guide stamp ...