Panel Information
ON / STANDBY
FLAT
ELECTRONIC EQUALIZER
EQ BYPASS
RB EQ
DIRECTION
EQ STEP
RB EQ
A
B
C
D
E
SPECTRUM
MEMORY
EMPH ASIS
ROCK
JAZZ
DISCO
RESET
1
2
3
19
7
8
9
10
11
12
4
5
6
13
14
17
15
16
18
1. ON/STANDBY
SWITCH
Depress button to switch “ON” the unit. Press release to
switch “OFF” unit into “STANDBY MODE”. If the unit is
left unattended for long periods, remove the A/C plug from
the power socket.
2. EQUALIZER FLAT BUTTON
This button is used to turn the equalizer flat.
This equalizer also has five pre-memorized 5 different
level curves of sound mode including.
3. EQ
BYPASS
When this button is pressed, the sound will be carried out
direct in and direct out, that means the equalizer will be
turned to flat.
4. RB EQ DIRECTION
5. EQ
STEP
Press the EQ STEP switch , the word ALT is displayed and
the alternating band level can be adjusted. And press it
once again, the word FINE is displayed & each succeeding
sound level can be adjusted.
6. RB
EQ
Press this button to display the EQ curves, press it again
will back to spectrum display.
7-11. USER PRESET SWITCH
You can press A-E to take your preset sound level curves.
12. MEMORY SPECTRUM
This EQ spectrum has 5 display modes. When pressing
MEMORY SPECTRUM switch once, one of the 5 display
modes will be appeared. And press once again, another one
display mode appeared and similarly.
When you have set the sound level curve of the equalizer
personally, pressing the MEMORY SPECTRUM switch,
“MEMO” will be lit up in the display. And press A-E to
memorize it in A-E preset knobs.
13 – 16. SOUND MODE
( ROCK/JAZZ/DISCO/CLASSIC )SWITCH
If you are listening to the above 4 kinds of music, press the
relative modes of switch. The best sound effect will be
heard.
17. EQUALIZER SETTING
These settings allow the levels approximate to the
frequencies indicated above the controls to be continuously
controlled from +12 dB to –12 dB for the left and right
channels separately.
Press key (
◄
) to shift the lower frequency band and key
(
►
) to shift the higher frequency band that you want to
adjust. When arrived to the pre-decided band, relative
indicator will flash.
Press level UP (
▲
) control key or level down control key
(
▼
) to the level that you wish to create, then press
MEMORY key and select (A-E) to program. And 5
different sets of personally created sound fields can be
stored.
18. EMPHASIS
Press RB EQ first, and rotate this EMPHASIS button to
select frequency, then press RB EQ DIRECTION to select
curves by rotating EMPHASIS.
