8
• SELECT AUDIO MODE
Press
SEL
button (3) to change audio mode through volume, bass, treble, balance
and fader modes. Use (4) and (5) buttons to adjust the selected mode.
When mode has not been adjusted for 3 seconds, display returns to normal radio
or CD display.
Volume
Adjust volume level by using (4) and (5) buttons.
Note:
The unit is initially set to
volume
mode.
Bass
Press
SEL
button (3) one time. Adjust bass level by using (4) and (5) buttons.
Treble
Press
SEL
button (3) two times. Adjust treble level by using (4) and (5) buttons.
Balance
Press
SEL
button (3) three times. Adjust sound balance between left and right
speakers by using (4) and (5) buttons.
Fader
Press
SEL
button (3) four times. Adjust sound balance between front and rear
speakers by using (4) and (5) buttons.
• LOUDNESS
Press and release
RND/LOU
button (11) immediately to reinforce the bass output.
• TIME SETTING
Press
DSP
button (6) to change the display to clock display, if no key is activated
in 5 seconds, it will automatically return to previous display.
Press and hold the
DSP
button (6) for 3 seconds until the clock display flashes.
Press (5) to change minutes or (4) to change hours.
• SELECT MODE
During CD operation, press
BND
button (7) to switch to radio mode. During radio
operation, when a compact disc is inserted in the disc slot, press
CD
button (12) to
switch to CD mode and start playing.
• LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated functions on the display (17).
• LED
When the front panel does not install on the unit, the
LED
indicator (18) is flashing.
• RESET
Press
RESET
button (19) to re-initialized the unit in case abnormalities or malfunction
is observed. When reset is activated, all preset station/program will be cleared.
Reset button can be access by any pointed material.
VOL
BAS
TRE
BAL
FAD
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
