4
REMOVE THE UNIT FROM THE DASH BOARD
FOR NON PULL-OUT VERSION
1. Remove the metal strap attached to the back of the unit.
2. Disconnect all the wires of the unit and the antenna plug.
3. Remove the handle frame from the trim plate.
4. Insert the supplied key into the slot as shown, and slide the unit out of the
dash board while holding the trim plate.
5. Remove the key from the slot.
TRIM
PLATE
SLEEVE
SLOT
SCREW-DRIVER
HANDLE FRAME
TRIM PLATE
SLEEVE
HANDLE
FOR PULL-OUT VERSION
1. Remove the metal strap attached to the back of the unit.
2. Disconnect all the wires of the unit and the antenna plug.
3. Lift up the handle and pull the trim plate out.
