5KW 3-Phase Grid Tied Solar Inverter
14
Assemble provided PV- connectors by following below steps:-
MC4 Female Connector Fitting.
The wire is stripped shorter than the metal crimp connector. There is a mark on the metal to
indicate how far the other connector will enter into this one, if cable extends past this mark
in the connector, then it will not be able to join the MC4 connectors together. Recommended
cable stripping length is between (10 - 15) mm.
Crimp the cable.
An MC4 (4 - 6)
mm
2
crimp connector is used because it gives a great connection every time
and holds all the bits in place when you crimp.
Pass the screw nut over the metal crimp first.
The plastic housing has a non return clip inside and if you have not put the nut on the cable
first, you will not be able to get the plastic housing off without damaging it and rendering it.
Insert the cable.
When you push the crimped cable into the connector, you will hear a ‘CLICK’. This is the non
return clip locking the crimp into the plastic housing.
©
Pyramid Electronics
