4
WIRELESS TRANSMITTER SET-UP
1
Remove the casing and insert
2 AA batteries (batteries not
included).
2
Turn on the power switch at the
back of the transmitter. The light
appears when the power is turned
on.
3
Select the desired transmitter
channel: 1, 2 or 3. Three channels
are available for the best quality
reception. If you experience static
or poor reception, try another
channel.
1
2
3
5
Press the channel selector button
once to turn on the channel selector.
Press the channel selector button again
to select the same channel as the trans-
mitter. Example: 1–1, 2–2 or 3–3. To add
multiple Sound Rockers, simply select
the same channel on each rocker.
Note:
Both the transmitter and control
panel must be on the same channel to
hear sound.
4
Twist the volume knob on
the control panel to click on the
power.
WARNING:
Do not
mix old and new batteries. Do not
mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium)
batteries.
WIRELESS TRANSMITTER MULTI-USER CONNECTION
1
For multi-user wireless
set-up, follow the wireless
transmitter set-up steps above.
2
To add multiple Sound Rockers,
simply select the same channel
on each additional chair. One
transmitter allows up to 8 chairs
to be used at the same time.
3
Twist the volume knob on
the control panel to click on the
power.
1
2
3
Note:
If the additional rockers are
receiving interference, try changing
the channel on both the transmitter
and the sound rockers. Multiple
Sound Rockers can also be
connected by using the 3.5 mm
Mini Audio and the Multi-user
input. (See multi-user connection
under direct connection methods).
