background image

Product Use

1. Keep the battery away from water. Liquid inside the device may cause short circuit, component 
failure, fire or even explosion.
2. Be cautious with third-party components and check their specifications before use to avoid 
safety accidents.
3. Keep the machine out of the reach of children. If children accidentally swallow parts, please seek 
assistance immediately. 
4.Do not use the battery at extreme environmental conditions such as of high temperature, 
humidity, altitude, or strong magnetic fields. Do not expose product in the sun. Otherwise, it might 
potentially affect the performance and cycle life of the battery. 
5.The battery should be used at temperature between 0˚C to 40˚C. Use of batteries in environment 
below 0˚C or above 40˚C, may trigger off battery self-protection and shutdown spontaneously. 
Allow the batteries to return to a normal operating temperature before use. 
6. Never disassemble the battery in any way.  Otherwise it may damage or suffer from the risk of 
electric shock. Contact local service center when maintenance is in need.
7. The display of battery capacity level is only for reference. Please refer to the actual condition.
8. Do not  wrap the battery while it is running. 
9. Do not place heavy objects on the machine.
10. Do not operate the battery with wet hand. Do not insert your fingers or other items into the 
machine. Otherwise it may incur the risk of electric shock.
11. Do not hit or shake the battery when use it.
12.Always use charger which conforms with the regulation of AC output.

Product Charging

1.Use Pylontech approved charger to charge the Battery. Over-voltage charging might 
potentially cause battery damage or even catch on fire. 
2. When charging the battery with PV, connect it with MPPT and ensure that the output voltage 
and current of MPPT are set in an appropriate range.
3. Do not charge the battery in high temperature. Keep it away from the fire and avoid the direct 
sunlight during charging.
4. During charging, it is normal that the adapter may heat up in the appropriate range.
5. When the battery is completely discharged, please recharge it within 12 hours. The battery will be 
irreversibly damaged if it stays fully discharged for a long time.

1

Safety Instructions

Содержание amber rock



















Отзывы: