10
/
23
16BISV0903
2.2.3 Control Module (internal power supply)
Control Module has two types:
internal
and
external
power supply.
Control Module (SC0500A-100S) Front Interface
Power Te/-
To connect battery power cables in series.
Power Switch
Switch the battery system’s (control module and high voltage DC power) ON/OFF.
External Power Te/-
Connect battery system with Inverter.
Dry Contact Terminal
Dry Contact Terminal: provided 2 input and 4 output dry contact signal.
Reset
Reset Button: Long press this button to restart the battery system.
ADD
ADD: 6 bit dial switches to manually distribute the communication address of the battery
system. Nether position is OFF, means
“
0
”
. Upper position is ON, means
“
1
”
. 1
st
bit to 5
th
bit is for
address, and the 6
th
bit dial switch support a 120
Ω
resistance.
Power Output Switch
To control the high voltage DC power ON/OFF during the System Switch ON. Normally it turns
in ON position, needn
’
t turn it OFF.
CAN / RS485
CAN Communication Terminal: (RJ45 port) follow CAN protocol, for communication between
battery system and Inverter.
